Coil nails are widely used in construction, pallet manufacturing, fencing, and woodworking because they allow fast and efficient fastening. Packed in coils and designed for use with pneumatic nail guns, they help professionals complete large projects quickly while maintaining strong and reliable joints.
However, even experienced contractors occasionally face problems when using coil nails. Issues such as nail jamming, misfiring, bending, or corrosion can slow down work, damage materials, and reduce overall productivity.
Understanding these problems and knowing how to fix them can significantly improve performance on the job site.
At Spikeel, contractors and manufacturers rely on high-quality coil nails designed for durability, smooth feeding, and consistent fastening performance. If you’re new to coil nails or looking to improve your workflow, this guide explains the most common coil nail problems and practical ways to solve them.
You can explore reliable nail solutions directly from the Spikeel website or browse their durable coil nail solutions on the products page:
https://www.spikeel.com/fasteners/
Common Problems When Using Coil Nails and How to Fix Them
In the following sections, we’ll explore the most common issues professionals face when using coil nails and provide practical solutions to fix them quickly and efficiently.
1. Nail Jamming in the Nail Gun
Problem
One of the most common issues when using coil nails is nail jamming inside the nail gun, which stops the tool from firing and interrupts work.
Causes
- Low-quality or damaged coil nails
- Incorrect nail size for the nail gun
- Dirt or debris inside the nail gun
- Bent nails or broken collation wires
Using poorly manufactured fasteners instead of reliable nail fasteners can significantly increase jamming frequency.
How to Fix It
- Remove the nail coil and clear the jammed nail carefully.
- Inspect the nail gun’s magazine and driver blade.
- Reload the coil properly before continuing work.
Prevention Tips
- Use high-quality coil nails from a trusted industrial coil nails manufacturer.
- Clean your nail gun regularly.
- Always check nail compatibility with your nail gun model.
Using the right fasteners makes a big difference. See our 15 Degree Wire Collated Coil Nails for better performance and fewer jams.
2. Nails Not Driving Fully into the Material
Problem
Sometimes coil nails fail to drive completely into the surface, leaving nail heads exposed.
Causes
- Low air pressure in pneumatic nail guns
- Hard material like hardwood or treated lumber
- Incorrect nail length or diameter
- Worn nail gun driver blade
How to Fix It
- Increase air pressure according to tool specifications.
- Adjust nail depth settings on the nail gun.
- Use the correct nail size for the material.
Prevention Tips
- Select appropriate nail length for the project.
- Ensure your compressor pressure is stable.
- Choose industrial coil nails designed for strong penetration.
3. Coil Nails Misfiring
Problem
Misfiring occurs when the nail gun triggers, but no nail is fired.
Causes
- Improper coil loading
- Worn firing mechanism
- Broken collation wire
- Incorrect nail angle for the gun
How to Fix It
- Reload the coil nails properly.
- Inspect the firing mechanism and driver blade.
- Replace damaged nail coils.
Prevention Tips
- Always load coil nails according to the manufacturer’s instructions.
- Use compatible nails with the correct collation angle.
- Buy nails from a reliable supplier with consistent quality.
4. Nail Bending During Use
Problem
Bent nails can damage materials and cause jams inside the nail gun.
Causes
- Poor quality steel nails
- Incorrect nail size
- Hitting knots or dense areas in wood
- Incorrect firing angle
How to Fix It
- Remove bent nails immediately.
- Replace the coil with undamaged nails.
- Adjust firing angle when working on dense wood.
Prevention Tips
- Choose durable coil nail solutions made with high-strength steel.
- Avoid firing nails into extremely dense areas when possible.
- Maintain correct nail gun alignment during use.
5. Rusting or Corrosion Issues
Problem
Rust can weaken nails and reduce fastening strength, especially in outdoor applications.
Causes
- Exposure to moisture or humidity
- Using uncoated nails in outdoor projects
- Improper nail storage
How to Fix It
- Replace rusted nails with new corrosion-resistant fasteners.
- Store nails in dry and sealed containers.
Prevention Tips
- Use galvanized or coated coil nails.
- Store nails away from moisture.
- Choose reliable nail fasteners designed for outdoor construction.
Professionals recommend corrosion-resistant coil nails for fencing, roofing, and pallet applications.
6. Choosing the Wrong Nail Size
Problem
Selecting the wrong nail length or diameter can lead to weak fastening or tool malfunction.
Causes
- Lack of knowledge about nail specifications
- Using nails incompatible with the nail gun
- Choosing nails too short or too long for the material
How to Fix It
- Review the nail gun specifications.
- Select the correct length, diameter, and collation angle.
Prevention Tips
- Consult product specifications before purchasing.
- Use nails recommended for your nail gun model.
- Work with a trusted industrial coil nails manufacturer for guidance.
7. Collation Breaking or Nails Separating
Problem
Collation holds coil nails together. When it breaks, nails separate and jam the nail gun.
Causes
- Weak welding or poor manufacturing
- Dropping or mishandling nail coils
- Low-quality coil nail products
How to Fix It
- Remove damaged coil nails immediately.
- Reload a new coil.
Prevention Tips
- Store nail coils properly.
- Avoid dropping them during transport.
- Choose high-quality coil nails with strong collation.
Reliable manufacturing significantly reduces these issues.
Professional Tips from Industry Experts
Contractors with years of experience recommend the following best practices:
- Always use nails compatible with your nail gun model
- Check air pressure before starting work
- Clean nail guns regularly to avoid debris buildup
- Store coil nails in dry conditions
- Choose nails from trusted manufacturers
Using quality fasteners improves job efficiency, safety, and project durability.
If you want consistent performance and fewer fastening problems, choosing the right manufacturer matters. Spikeel offers high-quality coil nails designed for construction, pallet manufacturing, and industrial applications.
Explore the full range of durable coil nail solutions, including 15 degree coil nails, on the official website: https://www.spikeel.com/
Whether you need bulk orders, wholesale supply, or reliable nail fasteners, partnering with a trusted manufacturer ensures better performance and long-lasting results.